|Place of Origin:||Guangzhou,China|
|Certification:||CE / Patent Right / Official Test Reports|
|Minimum Order Quantity:||Negotiable|
|Price:||Negotiable if good quantity|
|Packaging Details:||23x23x45cm colorful box/pc, and 4 pcs in 49x50x50cm carton|
|Delivery Time:||Around 7 working days upon receipt of order payment|
|Payment Terms:||100% TT / LC / WU / MG / WeChat Transfer / Alipay / Wanda Money Transfer / Cash in advance|
|Supply Ability:||1,000 sets/month|
|Type Name:||ESE Lightning Rod||Delta T:||60μs|
|Withstanding Test Required Iimp:||100kA||Iimp Withstanding:||≥ 200kA (10/350μs Waveform)|
|Test Standards:||NF C 17-102:2011 Annexe C & UNE21.186:2011 Paragraph C||Accredited Labs:||Shanghai / Romania / Spain - Europe|
|Net Weight(kg):||4.0||Lightning Rod HS Code:||8535400000|
Popular Home & Overseas Tested TSTLP Self-Active Ese Lightning Rod (also referred as ESE lightening rod) for sale - Reliable & Long Life
|Patent Right||Available as request|
|Delta T||60 microsecond|
|Standard Deviation ESE / Single Rod σ||σESE < 0.4 σPTS|
Lightning current withstanding test
|100kA (normative test as per standard)|
|Lightning current withstanding Iimp||≥ 200,000A (10/350 μs)|
|Capacity against wind speed||≥144 km/h|
|Approx net weight (g)||4000|
|Enclosure material||High Quality Stainless Steel|
|Test Standards / References||NF C 17-102:2011 Annexe C standard|
|NF C 17-108 standard / EN62305-2|
|UNE 21.186:2011 Paragraph C standard|
|IEC 60060-1:2010 Part 1 standard|
|EN 60060-1:2010 standard|
|GB/T T16927.1:2011 Part 1 standard|
|MECHANICAL SPECIFICATIONS of TSTLP SMT-ESE60 ese lightning rod|
|Fixing on pole||M20 Thread|
|Down conductor connection||Specific clamp|
|Dimensions||230*230*450 mm box/set, 4 sets in 480*490*490mm carton|
|Packing Contents||TSTLP® E.S.E. lightning rod Head, Nut, Hex key;|
|Approx Gross Weight||5.5 kg|
|Environmental sustainability||Completely recyclable|
The protection radius of TSTLP Ese Lightning rod is related to its height (h) relative to the surface to be protected, to its efficiency and to the selected protection level
for h ≥ 5 m; and
Rp = h × Rp(5)/5 for 2 m ≤ h ≤ 5 m
Rp (h) (m): is the protection radius at a given height h
h (m) : is the height of the ESE lightning rod tip over the horizontal plane through the furthest point of the object to be protected
r (m) : 20 m for protection level I
30m for protection level II
45m for protection level III
60m for protection level IV
Δ (m) = ΔT x 106
Field experience has proved that Δ is equal to the efficiency obtained during the ESE lightning rod evaluation tests
5m installation height is the standard installation height - mostly used by clients
Max Radius Protection of TSTLP SMT-ESE60 as per different protection levels:
Level 1: 80 meters radius coverage.
Level 2: 90 meters radius coverage.
Level 3: 105 meters radius coverage.
Level 4: 120 meters radius coverage.
It's highly recommended that Protection Level 1 to be used as highest protection for the objects protected, which most clients do the same.
The protection levels I, II, III or IV (as calculated in NF C 17-108 or EN62305-2) and the height of the TSTLP ESE lightning rod blow the structure to be protected
(H, defined by NF C 17-102 as a minimum 2m).
Additional protection against direct lightning strike for the highest 20% of the structure height for buildings greater than 60 m or any point above 120 m, using ESE lightning rod or any other means must be implemented at each façade wall according to a valid standard. Furthermore a minimum of 4 Down conductors, interconnected by a ring conductor when applicable, shall be used, distributed along the perimeter and if possible at each angle of the building.
NOTE: in general the risk due to the lateral flashes is low because only a few percent of all flashes to tall structures will be to the side and moreover their parameters are a lot lower than those of flashes to the top of structures.
1 - Is your company manufacturer or distributor ?
- Instead of lightning rod distributors, we're professional & reliable ESE Lightning Rod Manufacturer.
2 - Is TSTLP your brand ?
- Yes, TSTLP is our official brand.
3 - Can I trust your factory & products ?
A: Sure, we’re professional Lightning Protection Manufacturer with HIGH Quality culture and many years’ export experiences.
B: We’re using company bank accounts for receiving international payment and company e-mails for communications for high reliability.
C: We have great MANY real OVERSEAS project/installation references, which c/b tracked on line from our website.
D: Our products are tested by authorized Third-Parties Laboratories at HOME & ABROAD, test reports of which shows our company name(s)...
E: You’re welcome to visit our factory.
Download PDF TSTLP ESE Lightning Rod Catalog @ https://drive.google.com/file/d/1sHzPnbVjZLkIAeXGNRp4bKSoYsNoqf1C/view?usp=sharing
Tag: ese lightning rod, lightning rod for sale, ese lightening rod
Contact Person: Franklin