Name: Hazardous Area Surge Protection Equipment For 4-20mA Measuring Control And Bus System
Brand: TSTLP
SKU: TS-EX24
Rating: 4.9 (136 reviews)

Home Products Surge Protection Device

Hazardous Area Surge Protection Equipment For 4-20mA Measuring Control And Bus System

Product Details:

Place of Origin:	Guangzhou
Brand Name:	TSTLP
Certification:	CE Compliance
Model Number:	TS-EX24

Payment & Shipping Terms:

Minimum Order Quantity:	Negotiable
Price:	Negotiable if good quantity
Packaging Details:	By standard export box/carton
Delivery Time:	Around 7 working days upon receipt of payment
Payment Terms:	100% TT / LC / Western Union / MoneyGram / WeChat Transfer / Alipay / Wanda Money Transfer / Cash ahead
Supply Ability:	2000 sets/month

Contact Now

Detailed Product Description

Un:	24V	Uc:	32V- / 22.5~
Iimp:	1.5kA	IL:	0.55A
In:	10kA	FG:	67MHz
Enclosure Material:	Stainless Steel Case	Compliance:	IEC-61643-21 / GB18802.21 / YD/T 1542
High Light:	din rail surge protector , electrical surge protection devices

Hazardous area surge protection device for 4-20mA measuring control & bus system

Installed at LPZ O_B-2 or higher inside the control equipment, the built-in cable connected with the control equipment’s wiring terminal. TS-24 hazardous area surge protection device is available to apply in intrinsically safe circuit in hazardous areas and 4-20mA measuring control system and bus system.

Technical Data of TS-EX24 Hazardous area surge protection equipment

Model Number		TS-EX24
Normal Voltage	U_n	24V-
Rated voltage (max. continuous voltage)	U_c	32V- 22.6V ~
Lightning impulse current (10/350)	I_imp	1.5kA
Normal current	I_L	0.55A
Nominal discharge current (8/20)	In	10kA (per line); 10kA(total)
Voltage protection level at In	U_p	≤ 58V (line/line); ≤ 1700V (line/PG)
Voltage protection level at 1kV/μs	U_p	≤ 50V (line/line); ≤ 1200V (line/PG)
Bandwidth	f_G	67MHz
Capacitance	C	≤ 25pF (line/line); ≤ 15pF (line/PG)
Operating temperature range		-40 ⁰C ~ +80 ⁰C
Mounting in		M20 x 1.5 screws
Connection (input / output)		1.3 mm x 250mm length of the connecting lead
Earthing via		Connecting lead
Enclosure material		Stainless steel case
Compliance		IEC-61643-21, GB18802.21, YD/T 1542

MAIN CHARACTER

Small & easy replacement.
Easy to install inside the control equipment.
Stainless steel housing, fireproof & explosion-proof outdoor use.

Installation Instruction

Screwing into the wiring port of the control equipment directly
Blue wire connecteed with signal port “+”, Black Wire connected with signal port “-”
Yellow / Green wire connect with grounding port “GN” of grounding system.
After installation, check if commuication is be operating normally.

Regularly inspect the operating status, especially after lightning. Once the communication is off, electrician should check/replace the SPD.

INSTALLATION DIAGRAM

Hazardous Area Surge Protection Equipment For 4-20mA Measuring Control And Bus System 0

WARNING:

The hazardous area surge protection device must be installed by electrically skilled person, conforming to national standards and safety regulations.
It is recommended that installation should be done under power off condition.

PDF Catalog Download - TS-EX24 SPD for Hazardous ...

Tag: hazardous area surge protection, hazardous area surge protection device

Tag:

Contact Person: Franklin

Tel: +86-13926098193

Fax: 86-20-28819702-27806